Panasonic AW-HE100E Mode D'emploi page 17

How to turn the power on and off
Turning the power off
When performing the operations using the
accessory wireless remote control
1
Press one of the [CAM1] to [CAM4]
buttons on the wireless remote control to
select the unit.
2
Press the [ON/STANDBY] button on the
wireless remote control for two seconds.
The unit's power is turned off.
 The unit's status display lamp now lights up orange.
3
If a multiple number of units are going
to be used, repeat steps
required.
4
Set all the power switches of the units
and devices connected in the system to
OFF.
1 2
and as
16 (E)
When performing the operations
using the controller
1
Set the [OPERATE] switch on the
controller to OFF.
The power of all the cameras (including the unit)
connected to the controller is turned off.
 The unit's status display lamp now lights up orange.
2
Set all the power switches of the units
and devices connected in the system to
OFF.
For further details, refer to the Operating Instructions of the
controller.