Leuze electronic ROD4 Mode D'emploi page 26

EN
Technical data
NOTICE
Additional technical data and information on using the device can be
found in the operating instructions for the laser scanner.
Degree of protection
Contact protection
Operating temperature
Storage temperature
Humidity
Dimensions (W x H x D)
Distance from scanning
plane to bottom edge of
housing
Connection
Cable length
Housing
Weight
Vibrating stress
Continuous shock
Interference rejection
Rotating mirror drive
Rotating mirror bearings
Voltage supply
26
IP 65 in acc. with IEC 60529
All-insulated, protection class 2
0 °C ... +50 °C
With heating -20 °C ... +50 °C
-20 °C ... +60 °C
DIN 40040, table 10, code letter E
(reasonably dry)
141 x 167 x 168 in mm
48.75 mm
4 connectors
Max. 50 m with conductor cross-section 0.5 mm
(valid for Y1, Y2, and Y4 as RS 422)
diecast aluminum, plastic
Approx. 2.3 kg
In acc. with IEC 60068 part 2 - 6, 10 - 55 Hz
max 5 G
In acc. with IEC 60068 part 2 - 29, 10 G, 16 ms
As per DIN EN 61496-3 (in accordance with the re-
quirements for type 4)
As well as per DIN 40839-1/3 test pulses 1, 2, 3a, 3b
and 5 (no application for vehicles with combustion
motors)
brushless DC motor
Maintenance-free ball bearing
+24 V DC +20% / -30%
Protective Extra Low Voltage (PELV) - protective ex-
tra-low voltage.
For UL applications: use is permitted exclusively in
Class 2 circuits according to NEC.
2