Carrera RC HD Next FPV Instructions De Montage Et D'utilisation page 21

16 b
Functional overview of the flight menu:
1. Press this button to take photos
2. Press this button to take videos
3. Here you find the photos and videos taken on
your smartphone
4. Here, rotate the camera picture by 180°
5. Use this button before inserting the mobile
phone into the 3D VR glasses.
You are able to view all of the recorded videos
in the 3D VR perspective in the file: just acti-
vate this mode in the corresponding menu by
means of pressing the
You will find the pictures / videos in the respec-
tive picture / video file in your unit. (Please note
the access rights for the IOS). An additional
video player may possibly be required.
16 c
Wear the 3D VR spectacles
We recommend that you learn to fly the Quad-
rocopter reliably first of all, before you use the
3D spectacles!
CAUTION! NEVER fly a Quadrocopter with
the 3D VR spectacles alone! You would com-
mit a criminal offence by doing so!
Ensure that a 2nd person is standing next to
you whenever you fly the Quadrocoper while
wearing the 3D spectacles. The 2nd person
must monitor the Quadropcopter's position for
you and help you to correct the flying position,
in order to prevent accidents.
16 d
Using the portable phone on the spec-
tacles:
1. Open the spectacles on the front.
2. Clamp the portable phone, start the
cation and switch on the Quadrocopter.
3. Activate the 3D function
APPLICATION. Close the front of the specta-
cles again.
4. Put on the spectacles and adjust the head
band, as well as the distance from your eyes
and the depth of field or focus.
5. Now you can fly the Quadrocopter from the
pilot's view.
Please note that you only have a limited
field of vision!
17
Altering the camera angle
Using the setting wheel on the controller top
right, the camera angle can be altered (ap-
prox. 70°-80° tilt).
-icon.
appli-
3
in the
21
Automatic control of altitude
18
The Quadrocopter will maintain the current
flying altitude automatically as soon as you
release the left-hand joystick during the flight.
Auto Landing
19
You can trigger the automatic landing function
at any time by means of pressing the 'Auto
landing' button. The speed of the rotors will
reduce gradually as a result. You are able to
influence the landing position at any time dur-
ing the landing procedure by means of moving
the right-hand joystick. The motor will switch
itself off as soon as the Quadrocopter is on the
ground.
Auto-Start & Fly to 1.5m
20
Press the 'Auto-start & fly to 1.5 m' button on
the controller, in order to start the motors and
automatically fly up to the altitude of about 1.5
m . You are able to influence the direction of
flight at any time during the starting operation
by means of moving the right joystick. The
Quadrocopter will maintain itself in position
automatically as soon as the altitude of about
1.5 m has been reached.
Trimming the Quadrocopter
21
Auto-trimming
1. Place the Quadrocopter on a horizontal
surface.
2. Link the Quadrocopter with the control-
ler as described in "Linking the model with
the controller".
3. Slide the gas lever and the lever for for-
ward / back simultaneously into the right
lower corner. The LED on the Quadrocopter
flashes on briefly and then lights up continu-
ously. The signalling tone will sound once.
4. The neutral setting is completed.
22
When hovering, if the Quadrocopter flies to
the left or right without you moving the lever
for left / right movement, please proceed as
follows: If the Quadrocopter moves on its own
fast or slow sideways to the left, press the low-
er right trimmer for right / left tilt in steps to the
right. If the Quadrocopter moves right, press
the trimmer for right / left tilt in steps to the left.
ENGLISH