Viewing The Connections - Side Connectors; Power Connection; Aerial Connection; Using Usb Inputs - Sharp LC-40LE530E Mode D'emploi

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more
information, see "Conditional Access" section.
2. USB Inputs.
Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to this
input.
3. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to
the TV from headphones (optional).
4. Side audio-video connection
connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to
the TV's Side AV socket. Afterwards, insert your video cable's (not supplied) connector into the YELLOW input (located on
the plural side) of the supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable. Afterwards, insert your
device's audio cable's connectors into the RED and WHITE jack of the supplied side AV connection cable. Colours of the
connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when
connecting a device to your TV by using PC or COMPONENT VIDEO input.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to
the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

Using USB Inputs

USB Connection
• You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play
files stored in a USB drive or record programmes.
• 2.5" and 3.5" inch (hdd with external power supply) external hard disk drives are supported.
• To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature will not be available.
IMPORTANT !
• You may back up your files before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will
not be responsible for any file damage or dataloss.
• It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this
TV.
IMPORTANT: The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, the TV
will ask you to format the content. See the section, "Format Disk" in the following pages for more information on disk formatting.
Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is switched off.
Note: If you are going to connect a USB hard disk drive to the TV set, USB connection cable used between the disk drive and the TV should
have a USB logo and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process.
In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32.
CAUTION !
• Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive.
This may cause physical damage to the USB player and especially the USB device itself.
input is used for connecting video and audio signals of external devices. To make a video
SIDE VIEW USB MEMORY
English - 8 -