Timers; Setting Sleep Timer; Setting Programme Timers; Adding A Timer - Sharp LC-40LE530E Mode D'emploi

Timers

To view Timers menu, press "MENU" button and select Channel List
icon by using " " or " " button. Press OK button to view Channel
List menu. Use " " or " " button to highlight Timers and press OK
to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be programmed between
Off and 2.00 hours (120 minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular programme using this
feature.
Press " " button to set timers on an event. Programme timer function
buttons will be displayed on the screen.

Adding a Timer

• Press YELLOW button on the remote control to add a timer. The
following menu appears on the screen:
Network Type: This feature is unavailable to be set.
Timer Type: You can select timer type as Record or Timer.
Channel: Changes channel by using " " or " ".
Record Type: This item is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric buttons.
End: Enter an ending time using the numeric buttons.
Duration: Displays duration between the starting and ending time.
Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use "
" or " " buttons to select an option.
Change/Delete: Sets the change/delete permission.
Playback: Sets the playback permission and parental settings.
• Press GREEN button to save the timer. Press RED button to
cancel.

Editing a Timer

• Select the timer you want to edit by pressing "
• Press GREEN button. Edit Timer menu screen will be displayed.
• When finished with editing, press
press "MENU" button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing "
• Press RED button.
• Select YES by using " " or " " buttons to delete the timer. Select
NO to cancel.
Recording Conguration
Select Recording Configuration item in the Settings menu to configure
recording settings. The following menu is displayed for recording
configuration.
The following options are available for adjustments:
Start Early (*)
You set recording timer's starting time to start earlier by using this
setting.
(*) Available only for EU country options.
End Late (*)
" or " " button.
" or " " button.
GREEN button to save. You can
" or " " button.
English - 21 -
You set recording timer's end time to end later by using this settings.
(*) Available only for EU country options.
Max Timeshift
This setting allows you to set the maximum time allowed for timeshifting.
Duration options are approximate and can change accordingly,
depending on the broadcast received.
Format Disk
IMPORTANT: Note that ALL the data stored on the USB disk will be
lost and then the disk format will be converted to FAT32 if you activate
this feature.
•If you want to delete all files on the connected USB hard disk drive or
memory stick, you can use Format Disk option.
• Also, if your USB disk malfunctions, you can try formatting the
USB disk. In most cases formatting the USB disk will restore normal
operation; however, ALL the data stored on the USB disk will be lost
in such a case.
• Press OK button while the Format Disk option is highlighted. A menu
will appear on the screen, requiring you to enter a pin number. If you
have not changed the pin number, the factory default is 0000.
Note: If the Country option is set to France, you can use 4725 as the
default code.
After you enter the pin, a pop-up menu appears on the screen to ensure
that the hard disk should be formatted, select "YES" and press OK to
format the hard disk. Select "NO" and press OK to cancel. Ensure you
back up important recordings before you format the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard Disk Info by
using " " or " " key and press OK. USB disk information will be
displayed:
Conguring Date/Time Settings
Select Date/Time in the Settings menu to configure Date/Time settings.
Press OK button.
• Use " " or " " buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting will be
available.
Use " " or " " buttons to highlight the Time Settings Mode. Time
Settings Mode is set using " " or " " buttons. It can be set to AUTO or
MANUAL.
When AUTO is selected, Date/Time and Time Zone options will not be
available to be set. If MANUAL option is selected as the Time Zone can
be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone between GMT-12 or
GMT+12. Date/Time on the top of the menu list will then change according
to the selected Time Zone.
• Changes are automatically stored. Press "MENU" to exit.