Lcd Tv And Operating Buttons; Viewing The Connections - Back Connectors - Sharp LC-40LE530E Mode D'emploi

LCD TV and Operating Buttons

FRONT and REAR VIEW

Viewing the Connections - Back Connectors

1. SCART 2 inputs or outputs for external devices.
2. SCART 1 input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket.
3. Component Video Inputs (YPbPr)
You can connect the component video and audio sockets with a device that has component output. Connect the component video cables
between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure
that the letters on your TV, "Y", "Pb", "Pr" correspond with your device's connectors.
4. PC/YPbPr Audio Inputs
audio cable between the AUDIO INPUTS on the TV and audio output of your PC to enable PC audio. Connect the audio cable between
AUDIO INPUTS on the TV and audio outputs of your device to enable component audio.
5. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
6. RF Input connects to an aerial antenna system or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate
antenna cable, as shown in the illustration in the following pages.
7. PC Input
is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
8. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying High Definition pictures
from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or
Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
9. HDMI 2: HDMI Input
are used for connecting component video.
are used for connecting audio signals of a PC or a device that connects to the TV via YPbPr. Connect the PC
Control buttons VIEW
English - 7 -
Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press " " and
buttons at the same time to view
main menu.