First Time Installation; Installation; Auto Channel Scan (Retune) Menu Operation - Sharp LC-40LE530E Mode D'emploi

To cancel an already set reminder, highlight that programme and press
the OK button. Then select "Delete Timer" option. The timer will be
cancelled.
Note: It is not possible to record or set timer for two or more individual
events at the same time interval.

First Time Installation

IMPORTANT: Ensure that the aerial or cable is connected before
switching on the TV for the first time installation.
• When the TV is operated for the first time, installation wizard will
guide you through the process. First, language selection screen will
be displayed:
• Use " " or " " buttons to select your language and press OK button
to set selected language and continue.
• After selecting the language, "
requiring you to set Country,Teletext Language and Scan
Encrypted options.
• By pressing " " or " " button, select the country you want to set and
press " " button to highlight Teletext Language option. Use " " or
" " button to select desired Teletext Language.
• Press " " button after setting Teletext Language option. Scan
Encrypted will be then highlighted. You can set Scan Encrypted as
Yes if you want to scan coded stations.Afterwards select the desired
Teletext Language.
• Press OK button on the remote control to continue and the following
message will be displayed on the screen:
To select the "Yes" or "No" option, highlight the item by using " " or "
" buttons and press OK button.
Afterwards, the following OSD will be displayed on the screen:
If you select CABLE option, the following screen will be displayed:
Welcome!" screen will be displayed,
You can select frequency ranges from this screen. For highlighting lines
you see, use " " or " " button. You can enter the frequency range
manually by using the numeric buttons on the remote control. Set Start
and Stop Frequency as desired by using numeric buttons on the remote
control. After this operation, you can set Search Step as 8000 KHz or
1000 KHz. If you select 1000 KHz, the Tv will perform search process
in a detailed way. Searching duration will thus increase accordingly.
When finished, press OK button to start automatic search.
If you select AERIAL option from the Search Type screen, the television
will search for digital terrestrial TV broadcasts.
Note: You can press "MENU" button to cancel.
• After all the available stations are stored, Channel List will be
displayed on the screen. If you like the sort channels, according to
the LCN,please select "Yes" and than press "OK".
• Press OK button to quit channel list and watch TV.

Installation

Press "MENU" button on the remote control and select Installation
by using " " or " " button. Press OK button and the following menu
screen will be displayed.
Select Automatic Channel Scan (Retune) by using " "/" " button and
press OK button. Automatic Channel Scan (Retune) options will be
displayed. You can select options by using " "/" " and OK buttons.

Auto Channel Scan (Retune) Menu Operation

Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
English - 12 -