Nevadent NZR 1.5 B2 Mode D'emploi page 12

5) Once the interdental space appears sufficiently clean,
release the LO button 6 or the HI button 5 .
The appliance stops .
6) Pull the cleaning attachment 2 out of the interdental space
and continue cleaning with the next interdental space .
NOTE
► Divide your jaw into 4 quadrants . Once you have
cleaned all the interdental spaces in one quadrant, rinse
the cleaning attachment 2 under running water .
7) After completing the cleaning session, rinse the cleaning
attachment 2 thoroughly under running water . Hold the
appliance so that the cleaning attachment 2 is pointing
downwards and the water flows over the cleaning attach-
ment 2 .
If you want to remove and dispose of the cleaning attachment 2:
1) Remove the appliance head 1 by turning it a little so that
point on the appliance head 1 is aligned with the
symbol on the hand set 4 . You can then remove the
appliance head 1 .
2) Pull the cleaning attachment 2 off the attachment fitting 3 .
If it is attached too firmly, use the removal tool on the storage
box 9 .
3) To do this, push the cleaning attachment 2 all the way
through the opening in the storage box 9 and move the
hand set 4 together with the appliance head 1 in the
direction of the arrow:
This will remove the cleaning attachment 2 from the
attachment fitting 3 and it will fall off .
NZR 1.5 B2
GB │ IE │ NI │ 9 ■