Pando PHM-950 Manuel D'utilisation page 145

INOXPAN S.L.
17. INSTALLATION DIAGRAMS AND DIMENSIONS
PHM 950
This microwave is designed to be installed above 850mm from floor level. This microwave cannot
be installed under a worktop or below another oven, in order to avoid liquid spillage.
NOTE
Respect the ventilation holes in the cabinet, see installation drawings. If these vents are not
available, the product not work properly and may suffer damage that would NOT be covered by
the warranty.
 Push oven completely into the cabinet
and centre it.
 Open microwave door and fasten the
appliance to the cabinet using the four
screws provided. Insert the screws
through the front holes.
EN - 35