Pando PHM-950 Manuel D'utilisation page 119

INOXPAN S.L.
INSTALLATION

The electric system must be equipped with a means for disconnection, with a contact separation
in all poles that provides full disconnection under overvoltage category III.

If a plug is used for the electric connection, then it must be accessible after installation.

The installation must comply with current regulations.

Protection against electric shock must be provided by the electrical installation.

WARNING! The oven must be earthed.

WARNING! The appliance is intended to be built in. Please refer to the last pages of this user
manual for detailed information on the installation dimensions.
CLEANING AND MAINTENANCE

WARNING! Cut the power supply before cleaning and maintenance.

The appliance should be cleaned regularly and any food deposits removed.

Failure to maintain the appliance in a clean condition could lead to deterioration of the surface
that could adversely affect the life of the appliance and possibly result in a hazardous situation.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they
can scratch the surface, which may result in shattering of the glass.

Do not use a steam cleaner to clean the appliance.

The door contact surfaces (the front of the cavity and the inside part of the doors) must be kept
very clean in order to ensure the oven functions correctly.

Please follow the instructions regarding cleaning in the section "Oven Cleaning and
Maintenance".

WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock. Please refer to the chapter "CHANGING THE OVEN LIGHT BULB"
EN - 9