Instructions For Use Tm13; Introduction - Marmitek TM13 Guide Utilisateur

Marmitek X-10 Controllers. However, it is
possible that the Marmitek X-10 signals are
disturbed by e.g. baby phones which are in
TALK mode (continuous transmission). When
these kind of signals are present on the
power line it is possible that the Marmitek
X-10 signals will not come through.
5. The mains do not stop at the front door
of your home. Everything that is attached
to mains nearby your home can have
influence on Marmitek X-10 signals (e.g.
heavy machinery). If you think that your
system is influenced by devices out of your
house, it is advisable to install FD10 Phase
Coupler/Filter on each phase entering the
house. These filters will block signals coming
into or going out of your house, but will also
match the impedance for the mains. The
FD10's will not only filter but will also couple
the phases (please see 1).
INSTRUCTIONS FOR USE
TM13

INTRODUCTION

Congratulations with your purchase of the
Marmitek X-10 HOME CONTROL TM13
Transceiver. Among other things, the TM13
Transceiver allows you to use your Marmitek
X-10 remote control to operate your X-10
switching and dimming modules, wherever
you are in your house.
How does it work?
The TM13 is a controller that is activated by
transmitters. The controller operates
Marmitek X-10 modules via the mains to
switch your lighting and appliances on and
off. This means that the TM13 forms the
heart of your Marmitek X-10 installation.
The TM13 Transceiver operates with the fol-
lowing transmitters:
• Marmitek X-10 remote controls such as
the EasyControl8 and the EasyTouch
35.
• The SS13 slimline wireless switch (the
ideal solution for situations that require an
(additional) switch without having to fit
wires. Can be fitted to walls, glass, doors,
tables, etc.)
TM13 TRANCEIVER MODULE 5