User Instructions Am12 Appliance Module; Installation Am12W - Marmitek AM12 Guide Utilisateur

USER INSTRUCTIONS AM12
APPLIANCE MODULE
1. Set the House Code and Unit Code dial on the front of the Module to the
desired codes.
2. Plug the appliance or lamp into the Module.
3. Plug the Module into a wall outlet.
You are now able to control your Module with any Marmitek X-10 Controller.

INSTALLATION AM12W

To install the AM12W, neutral and phase are required at the installation point.
SWITCH OFF APPROPRIATE MAINS FUSE AND MASTER SWITCH!
(Installation By A Certified Installer)
1. Mount the AM12W using the schematics below.
2. Set the rotary code switches on the front side to the desired address.
AM12W
6
Lamp (Black)
Live 230V (Brown)
Neutral (Blue)
© MARMITEK