Error Displays - Clarion DXZ535 Mode D'emploi

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2 A CD is caught inside the CD deck and is
not ejected.
ERROR 3 A CD cannot be played due to scratches,
etc.
ERROR 6 A CD is loaded upside-down inside the
CD deck and does not play.
ERROR 2
A CD inside the CD changer is not
loaded.
ERROR 3
A CD inside the CD changer cannot be
played due to scratches, etc.
ERROR 6
A CD inside the CD changer cannot be
played because it is loaded upside-down.
ERROR H Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically.
ERROR 2 An MD inside the MD changer is not
loaded.
ERROR 3 An MD inside the MD changer cannot be
played due to scratches, etc.
ERROR 6 An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
26
DXZ535
Cause Measure
This is a failure of CD deck's mechanism
and consult your store of purchase.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it properly.
This is a failure of CD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
This is a failure of MD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.