Télécharger Imprimer la page

Güde MIG 172 6W Mode D'emploi page 20

Masquer les pouces Voir aussi pour MIG 172 6W:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
ENGLISH
16
Technical Data
Welder
Art. No ...............................................................................................................................................................................................20074
Service connection ............................................................................................................................................. 230 V 50 Hz
Rated input voltage (AC Voltage) U
Protection ................................................................................................................................................................................ 16 A
Maximum rated input current I
Maximum effective input current I
Idle voltage U
....................................................................................................................................................................................40 V
0
Regulated section ........................................................................................................................................................ 25-135 A
Switch-on time X * .....10% .................... 20% ..................30% ................... 60% ...................100% ........................100%
Welding current I
Operating voltage U
Wire thickness .....................................................................................................................................................................0,6 - 1,0 mm
Material thickness .........................................................................................................................................................1 - 8 mm
Weight ..................................................................................................................................................................................... 34 kg
Dimensions ......................................................................................................................................................... 650 x 285 x 460 mm
Degree of protection.................................................................................................................................................................... IP 21S
Insulation class ........................................................................................................................................................................................ H
* Actual working time and total working time ratio.
Switch-on time determined at 40°C using simulation
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
Specified Conditions Of Use
Welder in protective atmosphere for thermal connec-
tion of ferrous metals by melting edges and including
mixture
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Safety instructions
WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
........................................................................................................................................ 230 V
1
............................................................................................................................................. 27 A
1max
....................................................................................................................................... 9,7 A
1eff
....................145 A .................. 110 A ................77 A................... 54 A ...................42 A............................. 25 A
2
.............20,75 V ............... 19 V...................17,8 V................ 16,7 V ................16,1 V ....................15,25 V
2
Read and understand the
operating instructions before
using the appliance. Abide by all
IP21 protection degree of the welder. The welder
must not be exposed to rain and moisture when
being operated or stored.
Check the voltage. Technical data given on the type
label must correspond with electric network voltage.
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less than
1.5 mm
2
. Use of extension cables of different length
and cross-section and also of adapters and multiple
sockets should be avoided.
Check the cable and/or socket for damages before
the appliance putting into operation.
Defective cable or plug may cause electric shock.
Do not pull the service cable to pull the plug out of
socket.
Do not expose yourself or other persons without pro-
tection to electric arc or hot metal. Spraying welding
pearls may cause burns.
A suitable welding shield, protective clothes and
protective gloves to be worn at all times.
Long-term inhalation of welding gases may be harm-
ful to your health.
Work with an exhaust system or in well ventilated
spaces. Avoid direct inhalation of gases.
172/6W

Publicité

loading

Ce manuel est également adapté pour:

20074