NOTE: This operations section was designed to give instructions on the basic operations of
this planer. However, it is in no way comprehensive of every planer operation. It is strongly
recommended that you read books, trade magazines, or get formal training to maximize the
potential of your planer while minimizing the risks.
NOTE: This planer is designed to process wood ONLY.
WARNING! Make sure the switch is in the "OFF" position before connecting cord into
socket. Do not touch the plug's prongs when unplugging or plugging.
WARNING! In the case of a power outage (such as a breaker or fuse trip), always turn the
switch to the "OFF" position until the power is restored.
OPERATIONS
19