Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
C
A
B
FIG 2A
FIG 2B
SECURING PLANER TO A TABLE OR WORKBENCH
During operation, if there is any tendency for the planer to tip over, slide or walk, the planer
MUST be secured to a supporting surface such as a workbench or table. Four holes are
provided (2 are shown at (A)) to securely mount the planer. The surface you are mounting the
planer to should be perfectly flat. SEE FIG 3.
A
FIG 3
14
Publicité
