Publicité
Les langues disponibles
Les langues disponibles
WARNING! MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE
POWER SOURCE.
ATTACHING DEPTH ADJUSTMENT HANDLE
Attach the raise/lower adjustment handle (A) to the shaft (B) and fasten in place with 1
Hex Socket Head screw. Tighten screw using supplied hex wrench. SEE FIG 1.
FIG 1
ATTACHING DUST PORT and ADAPTOR
The Dust Port is to be used when the planer to be connected to a dust collector. It has a
2" port on it to accommodate dust collection systems and 2-1/2" & 4" adaptor to connect
vacuum hose.
To install:
1. Install the 2" dust port (A) in the rear of the planer by using 2 thumb screws (B). SEE
FIG 2A. If needed for 2-1/2" or 4" vacuum hose, install the vacuum adaptor by supplied
hex wrench(C). SEE FIG 2B.
ASSEMBLY
A
B
13
Publicité
