AKO -16524A Guide Rapide page 19

Description
Keypad
Indicators
Constant: Stand-By Mode activated. Regulation
is paused.
Flashing: Controlled stop process for the
regulation in progress.
Constant: Cold room door open.
Flashing: The door has been open for a longer
time than defined in parameter A12.
There is an active alarm, but not an active HACCP
alarm.
Constant: HACCP alarm active.
Flashing: HACCP alarm recorded and
unconfirmed. Press the
HACCP alarm.
Constant: The SELFDRIVE mode is active.
Flashing: An error has been detected in the
SELFDRIVE mode.
Constant: Evaporator fans active.
Flashing: The evaporator fans should be active
but a delay is preventing this.
Display
key to confirm an
19
Constant: The cold solenoid is active.
Flashing: The solenoid should be active but a
delay or protection is preventing this.
Constant: Compressor active.
Flashing: The compressor should be active but a
delay or protection is preventing this.
Defrost relay active.
Continuous cycle mode active.
Cold room light active.
Alarm in progress muted.
Temperature displayed in ° Fahrenheit /
º Centigrade.
Programming mode active.
Constant: CAMM module in operation.
Flashing: Malfunction in CAMM module.
Bluetooth activated (only with CAMM module).
1652H4A11 Ed.08