Eneo VKCD-1416C Mode D'emploi page 43

Table des Matières

Les langues disponibles

4.2.7 SPECIAL

SYNC

PHASE

D/N MODE

D/N DELAY

HI-RES

2DNR

3DNR

WHITE DET

LEVEL

4.2.8 EFFECT

Select internal or line lock mode. (DC power is internal sync only)

Adjust sync phase in line lock mode.

Select D/N, Color, BW.

Adjust the working time of the filter when D/N operated.

(5,10,20 sec)

Select high resolution mode. (LOW/MID/HIGH)

Select 2D noise reduction level. (OFF/01~07)

Select 3D noise reduction level. (AUTO/01~28)

AUTO : If the motion is detected, DNR level

automatically so "ghost" is decreased, on the other

hand, noise will be increased. On the opposit, if there

is no motion, DNR level is raised and noise will be

decreased.

Press the Menu key to execute the White Pixel Detection function

and then the Iris will be closed automatically. When detection is

completed, the operation automatically returns to the normal state.

Adjust the threshold level from 1 to 15. (Default is 4)

becomes lower

Table des Matières

Chapitres

Table des Matières