Eneo VKCD-1416C Mode D'emploi page 40

NOTE 1 : When "ZOOM PRESET" is selected, you can adjust the preset zoom location
using the "tele" and "wide" buttons.
NOTE 2 : When after the zoom location has been selected press the "menu" button to
store the location.
4.2.2 WB (White Balance)
MODE
- AWB
- WAWB
-INDOOR
-OUTDOOR
-MANUAL
-CRS
R GAIN
B GAIN
FRAME ADJ
4.2.3 AE (Auto Exposure)
MODE
-AUTO1
Select white balance mode.
(AWB/WAWB/INDOOR/OUTDOOR/MANUAL/CRS)
Auto white balance mode. (2500~9500'K)
Wide range auto white balance mode. (1800~10500'K)
Indoor white balance mode.
Outdoor white balance mode.
Manual mode. You can change R and B Gain manually.
Color rolling suppression mode.
Adjust R gain value. (0~255)
Adjust B gain value. (0~255)
Since the color rolling path differs depending on the fluorescent
lamp used, adjust the color rolling frame for each fluorescent lamp.
So press Menu key to adjust frame and after about 10 seconds,
the adjust mode will be finished automatically and 'ENT' turns to
'END'.
Select Exposure mode. (AUTO1/AUTO2/SHUT PRI/MANUAL)
Auto exposure mode 1. (Use to normal surroundings : indoor)
15