Publicité
Les langues disponibles
Les langues disponibles
■
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help. Liquid
ejected from the battery may cause irritation or burns.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SPECIFIC SAFETY RULES
■
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
■
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer, always fit the cutting device
cover. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
■
Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring or
its own cord. Cutter blades contacting a "live" wire may
2
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
INTENDED USE
■
This product is designed for home or domestic use. It
is intended to cut and trim hedges, shrubs and similar
vegetation.
■
It should be used in dry, well illuminated conditions.
■
It is NOT intended to cut grass, trees or branches. It
should not be used for any other purpose than hedge
trimming.
ADDITIONAL SAFETY RULES
PREPARATION
■
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
■
Clear the area of children, bystanders and pets.
At a minimum, keep all children, bystanders and
pets outside a 15m radius; there still may be a risk to
bystanders from thrown objects. If you are approached,
stop the unit immediately.
■
Do not operate in poor lighting. Use the unit only in
daylight or good artificial light.
■
Inspect the unit before use. Replace any damaged
parts. Check for battery pack leaks.
■
Make sure all fasteners and guards are in place
and secure. Replace cutting blades or any other parts
that are cracked, chipped, or damaged. Make sure
the cutting blade is properly installed and securely
fastened. Failure to do so can result in personal injury
to the operator and bystanders, as well as damage to
the unit.
■
Never attempt to use an incomplete machine or one
fitted with an unauthorised modification. If any parts
are missing, do not operate unit until the missing parts
are replaced.
OPERATION
■
Do not use trimmer without front handle in place.
Keep both hands on handles when unit is in use.
■
Before starting the unit, make sure the cutting
blades will not come in contact with anything.
■
Keep unit clean of hedge clippings and other
materials. They may become lodged in the cutting
blades.
■
If the machine strikes or becomes entangled with
foreign objects, stop the unit immediately, remove the
battery pack and check for damage. Do not operate the
unit with loose or damaged parts.
■
Always be aware of your surroundings and stay
alert for possible hazards that you may not hear
due to the noise of the machine.
■
The vibration level during actual use of the power tool
English
Publicité
