Smart Flush Function Programming; Sailing Or Mooring Mode - Tecma X-light Manuel D'installation Et Maintenance

Operation/installation/service manual
Manuale di utilizzo / installazione / manutenzione
X-light / Privilege / Evolution / Breeze / E-Breeze / Silence Plus / Elegance / Saninautico / Prestige
2.5.3

SMART FLUSH function programming

2.5.3.1

Sailing or Mooring mode

Set the system to sailing mode if you plan on sailing often. The toilet will remain empty after use.
Only a small amount of water will be added to create a water trap. This will avoid accidental water
spilling caused by motion of the vessel during navigation.
SAILING MODE: the toilet bowl remains empty at the end of the flush cycle
1. The bowl
is empty
Set the system to mooring mode if you plan on docking for a long period of time. Water will
remain in the toilet after use allowing you to flush by pressing a single button.
www.thetfordmarine.com
Manual rev 25.2014
2. Press the BEFORE USE
button before using the toilet.
The solenoid valve will let in
the desired amount of water
for max 12 seconds.
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy
/
MACERATOR TOILETS
TOILET MACERATRICI
3. Press the AFTER USE button after
using the toilet.
A combined action of the solenoid valve
and macerator pump will clean and rinse
the bowl. A small water trap is created
and the toilet bowl will remain empty.
42
©TECMA SRL