USRobotics USR5419 Guide D'installation Rapide page 8

English
To manually connect to any router or access point, refer to Connect your PCI
Adapter to any wireless router or access point manually.
Connect your PCI Adapter to a SecureEasySetup certified Router or
Access Point
1. Select USRobotics
2. Click Next and follow the on-screen instructions. Security and communica-
tion between the SecureEasySetup certified router or access point and the
PCI Adapter are automatically configured.
At the end of the setup you will have the option to print or save to a file the
network name and security settings.
Connect your PCI Adapter to any wireless router or access point manually
Windows Vista
You must use Windows to create a wireless connection.
1. Right-click the configuration utility in the system tray and select Connect
Using Wizard.
2. If the wireless network is listed, double-click it to connect. If prompted, enter
the Security Key/Passphrase for the wireless network.
3. If the wireless network is not listed:
A. Click Set up a connection or network.
B. Select Manually connect to a wireless network.
C. Click Next and follow the on-screen instructions to create a network
profiles and connect. You may need the Network name, Security type,
Encryption type and Security Key/Passphrase for the router or access
point.
Windows XP and 2000
1. Right click the configuration icon in the system tray and select Open Utility.
2. Pull down the Add menu and select Use Wizard.
4
Ndx
SecureEasySetup Wizard from the Start menu.