USRobotics USR5419 Guide D'installation Rapide page 6

English
Install your USRobotics Wireless
1. Insert the USRobotics Installation CD-ROM into your computer's CD or
DVD ROM drive.
If the CD does not start automatically, start it manually as follows:
A. Windows Vista: Click Windows Start > Computer.
Windows XP: Click Windows Start > My Computer.
Windows 2000: On the desktop, double-click My Computer.
B. Double-click the CD drive.
2. Click Wireless
instructions.
3. If a window appears warning that the software has not passed Windows test-
ing, continue with the installation. USRobotics has thoroughly tested the
operation of the software with Windows to ensure its safe operation.
Windows Vista only: Click Install driver software anyway.
Windows XP only: Click Continue Anyway.
Windows 2000 only: Click Yes.
4. When you are prompted to Power Off your computer, click Power Off
(with Windows 2000 you must also manually power off the computer), and
unplug your computer.
5. Open your computer's case and remove the screw and metal filler bracket for
an available PCI slot.
6. Hold the wireless adapter by its edges. Do not touch the contacts on the con-
nector. Insert the wireless adapter into the available PCI slot and press it
firmly to seat it in the connector.
7. Use the screw removed in Step 5. to secure the PCI Adapter.
8. Attach the antennas to the wireless adapter.
9. Close your computer, plug it in, and turn it on.
10. Windows XP only:
A. If the Found New Hardware Wizard asks to connect to the Windows
update Web site to search for software, select No, not this time and
click Next.
2
N
dx PCI Adapter, click Install, and follow the on-screen
N dx PCI Adapter