USRobotics USR5419 Guide D'installation Rapide page 12

English
2. Click Set up a connection or network.
3. Select Manually connect to a wireless network and click Next.
4. Follow the on-screen instructions to create a network profile and connect.
You may need the Network name, Security type, Encryption type and Secu-
rity Key/Passphrase for the router or access point.
All other Windows operating systems:
The network may not be broadcasting a Network Name (SSID). Open the
N
USRobotics dx Configuration Utility, and click the Wireless Networks
tab. Click Add and select Use Utility (advanced network). Enter the network
name and security configuration being used by the router or access point. Click
OK.
The wireless adapter does not work properly, and I may need
to uninstall the device.
S o l u t i o n :
1. Do one of the following:
Windows Vista Users:
A. Click Windows Start > Control Panel > Programs > Programs
and Features.
B. Select the PC card or PCI adapter, then click Uninstall.
Windows XP Users:
o
Click Windows Start > Control Panel > Add or Remove Programs
> USRobotics Wireless
Windows 2000 Users:
o
Click Windows Start > Settings > Control Panel > Add/Remove
Programs > USRobotics Wireless
Remove.
2. When the computer completes the uninstallation, turn off the computer and
physically remove the modem from the computer.
C a u ti o n : To avoid the risk of electric shock, make sure your computer and
all peripheral devices are turned off and unplugged.
8
N
dx Adapter and then Remove.
N
dx Adapter and then