USRobotics USR5419 Guide D'installation Rapide page 7

B. With Install the software automatically selected, click Next.
11. If a window appears warning that the software has not passed Windows test-
ing, continue with the installation. USRobotics has thoroughly tested the
operation of the software with Windows to ensure its safe operation.
Windows Vista only: Click Install driver software anyway.
Windows XP only: Click Continue Anyway.
Windows 2000 only: Click Yes.
12. Windows XP only: Click Finish.
13. Select the option that matches your wireless network and follow the on-
screen instructions.
You can use the SecureEasySetup™ button to connect your PCI Adapter to
N
installed dx or other certified SecureEasySetup wireless routers or access
points.
You can connect your PCI Adapter to an
certified router or access point using the SecureEasySetup button.
SecureEasySetup configures the wireless security settings to creates a secure
connection. If your wireless router or access point is SecureEasySetup certi-
fied, one of the following logos should appear on the device:
You can also manually enter the wireless security settings to connect your
PCI Adapter to any router or access point.
If you choose not to connect to a wireless network at this time, you can con-
nect later by following the instructions under To Connect to a Wireless
Router or Access Point After Installation.
C o n g ra t u l a t i o n s . You have successfully completed the installation proce-
dure. Please register your USRobotics Wireless
www.usr.com/productreg/
To Connect to a Wireless Router or Access Point After Instal-
lation
To connect to an
to Connect your PCI Adapter to a SecureEasySetup certified Router or
Access Point.
1BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or
registered trademarks of Broadcom Corporation in the United States and/or other coun-
tries.
.
N
dx or other SecureEasySetup certified network device, refer
N
dx or other SecureEasySetup
N
dx PCI Adapter at
English
1
3