USRobotics USR5419 Guide D'installation Rapide page 10

English
2. Reboot your router (and access point). If you are using a DSL PPPoE con-
nection, you may need to re-establish that connection from the router after
rebooting it.
3. Reboot your computer. Wait for the computer to completely reboot and try
to access the Internet.
If you still have trouble using the router, see the Troubleshooting section User
Guide on the USRobotics Installation CD-ROM.
I cannot connect to my wireless router or access point.
S o l u t i o n :
If you are using a USRobotics Wireless
Ndx
USRobotics
on-screen instructions.
S o l u t i o n :
Check the USRobotics
confirm the connection status. If you are connected to your wireless network
device, the icon is green or yellow. If the icon is red, see "To Connect to a Wire-
less Router or Access Point After Installation" on page 3 for instructions to
reconnect to your wireless router or access point.
S o l u t i o n :
Make sure the network name and security settings on your wireless adapter
match the settings on your wireless router or access point.
S o l u t i o n :
Windows XP and 2000 only: Change the channel used by the wireless router or
access point and check for the network on the Wireless Networks tab.
Security is enabled on my Wireless Router, Access Point, or
network authentication server and my wireless adapter can-
not connect.
S o l u t i o n :
The wireless adapter supports WEP (open and shared, 64 and 128 bit), WPA,
WPA2, 802.1X, and CCKM encryption. Verify that all of the security features
you have entered for the profile of your wireless adapter match the settings for
your wireless router or access point. For more information about setting up con-
nection profiles and security features, right click the USRobotics
ration Utility icon and select Help Files.
WPA and WPA2 encryption require Windows Vista, Windows XP with Service
Pack 2 or Windows 2000 with Service Pack 4.
6
SecureEasySetup Wizard from the Start menu. Follow the
N
dx Configuration Utility icon in the system tray to
N
dx Router or Access Point, select
N
dx Configu-