switel BCE26 Mode D'emploi page 34

8 Troubleshooting
1. No power
S
The unit is switched off. Switch the device to position A or B
using the OFF / A / B switch.
S
Ensure that the batteries have been inserted correctly.
S
Check that the adapter plug is correctly connected to the device.
2. No acoustic signal
S
Volume control on the receiver is set too low. Set a higher
volume.
S
The devices are out of range. Reduce the distance between the
transmitter and receiver units.
S
Check that both devices are set to the same channel.
3. Interference noise can be heard from the receiver
S
Check that both devices are set to the same channel.
S
Reduce the distance between the transmitter and receiver units.
4. Other voices or noises are received
S
Signal disturbances resulting from other babyphones transmitting
on the same channel or through cordless phones. Change
channel to reduce interference.
5. High tones (acoustic feedback)
S
Receiver and transmitter are too close together. Increase the
distance between the transmitter and receiver.
34