switel BDT700 Mode D'emploi page 123

1. Press the menu button
2. Select the SETUP menu with
3. Select the DEFAULT function with
4. Enter the PIN code using the number pad (factory setting 0000) and confirm with
The message CONFIRM? will appear in the display.
5. Confirm with the menu button
6. After a short time, the factory settings will be restored. The display will indicate the
ready mode once more.
Note: If you have forgotten the PIN code, you can also restore the factory settings without it.
1. Remove a battery from the handset.
2. Hold the button pressed and replace the battery. Hold the
the message DEFAULT appears in the display.
3. Confirm with
by pressing the
- Special functions -
.
and
.
and the factory settings will be restored. You can abort the process
button.
and confirm with
and and confirm with
.
.
button pressed until
.
123