Troubleshooting - Tribest Solostar 4 Mode D'emploi

TROUBLESHOOTING

SYMPTOM
There is no power.
Loud Noise
Difficulty in feeding foods into the
machine
The motor has stopped
The Auger Housing is stuck or hard
to take out.
The Auger Housing does not fit
onto the Main Body
Juice leaks from the back of the
Auger Housing
SOLUTION
• Make sure the electrical cord is properly put into
the outlet.
• Make sure the Solostar 4 is leveled on a flat surface.
• Make sure that the unit corresponds to the voltage
in your country.
• Produce needs to be cut into smaller
lengthwise pieces.
• The Solostar 4 may be operating in reverse.
• You may have overloaded the Solostar 4; reduce
the volume of produce in half.
• Foreign substances may have been inserted.
• The Auger Housing Retaining Ring is not moving
or is too tight.
• Try pressing the reverse switch 2 –3 times.
• There may be foreign materials inside.
• You may have overloaded the unit; reduce the
amount of produce being put in.
EN
15