Tribest Solostar 4 Mode D'emploi page 11

B. Homogenizing Screen: for making rice cake/
breadstick, grinding (tomato, garlic, coffee
beans, etc.), pasta noodles (spaghetti or
fettuccini), or tofu.
(1) Attach the Homogenizing Screen into the Auger
Housing. Fasten and turn the Screen Locking
Cap counter-clockwise to lock in position.
(2) Place the desired nozzle into the Screen
Locking Cap and
(3) turn it counter- clockwise.
• Use the Homogenizing Nozzle for homogenizing
and grinding fresh garlic, onion, ginger or peppers.
• Do not use the Homogenizing Nozzle for dried
pepper, coffee beans, etc.
4. Place the Funnel over the Feeding Chute of Auger
Housing. Place the Juice Container underneath the
specified Juice Outlet and the Pulp Container
underneath the Nozzle. Attach the Power Cord to the
rear of the machine and plug the other end into an
electrical outlet.
5. Turn the Solostar 4 on and feed fruits and vegetables
in small amounts, into the Funnel. Use the Plastic
Plunger for assistance in pushing the food down.
• Food needs to be cut into smaller lengthwise
pieces before juicing.
• There may be some squeaking noises while
operating, this is normal.
6. If any hard or foreign objects are put into the
Solostar 4 and results in the motor stopping, use
the Reverse Switch 2-3 times for about 2 to 3
seconds.
• When you need to use the Reverse Switch
during normal operation, press the Stop
Switch first then the Reverse Switch.
B
2
4
5
6
On Switch
Stop Switch
Reverse Switch
EN
11