Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only be
operated by persons who were instructed concerning the
operation of the machine and who are informed about
the associated dangers. The minimum age requirement
must be complied with. In addition to the safety require-
ments in these operating instructions and your country's
applicable regulations, you should observe the generally
recognized technical rules concerning the operation of
woodworking machines.
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Device description (Fig. 1)
1.
Folding bow-shaped handle
2.
Vacuum hose
3.
Vacuum nozzle
4.
Carrying handle
5.
Speed regulation
6.
Pipe and accessory holder
7.
Socket
8.
Quick coupling
9.
Rear wheels
10. Front wheels
11. Water tank
12. Floor nozzle
13. Hose connection cover
14. Telescopic vacuum pipe
15. On/off switch
16. Blast nozzle
17. Unlock button for telescopic vacuum pipe
18. Tapping function button
19. Handle
20. Foam filter
21. HEPA filter
22. Dust extraction adapter
23. Joint nozzle
24. Brush nozzle
25. Dust bag
Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
Proper use
The wet and dry vacuum cleaner is designed for wet
and dry vacuuming using the appropriate filter. The ap-
pliance is not suitable for the vacuuming of combustib-
le, explosive or harmful substances.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of mi-
suse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused
as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equi-
valent purposes.
Safety instructions
m DANGER
• The appliance may only be connected to alternating
current. The voltage must correspond with the type
plate on the appliance.
• Never touch the mains plug and the socket with wet
• hands.
• Do not pull the plug from the socket by pulling on
the connecting cable.
• Check the power cord with mains plug for damage
11 І 68
11 І 68