Recommendations For Correct Installation; Drilling The Wall - Ferroli MIDAS PC10 12000 Manuel D'installation

RECOMMENDATIONS FOR CORRECT INSTALLATION

• Horizontal installation:
- Ensure a slight slope towards the outflow side to
prevent water from stagnating in the tray, see Fig.1
- Ensure that the drain pipe does not bend upwards
in any way, see 1-Fig.2.
- It is advisable to make a trap (1) on the condensa-
tion drain pipe, to prevent unpleasant odours from
rising, see Fig.3.

DRILLING THE WALL

A 100 mm diameter hole, slightly sloping outwards, must be made in the
wall to connect the interior unit to the exterior unit. It is advisable to begin
drilling the hole on one side of the wall (A) and to finish it on the other (B),
to avoid unwanted breakage.
14
INSTALLATION
≥A+10
Fig.1
A
Fig.2
Fig.3
Fig.1