Side Mounting Kit For The Low Loss Header; Safety Valve; Low Water Cut Off - Rinnai E Série Instructions D'installation Et D'entretien

6.1.2
6.1.3
i
NOTICE
6.1.4
i
NOTICE
24

Side mounting kit for the Low Loss header

A side mounting kit for the low loss header is available as an accessory. This kit
relocates the low loss header from directly below the boiler to the left side of the boiler
only. The kit includes all the parts required to relocate the low loss header including
all mounting brackets and material. This kit provides an alternative to for installations
with height limitations and allows for an alternative piping installation.
Kit 1 for boiler models E75C and E110C Rinnai part number: 804000071.
Side mounting kit

Safety valve

An ASME 30 psi pressure relief valve is installed on the plumbing kit included
with the boiler.

Low water cut off

The Rinnai E boiler has a factory installed pressure switch type Low Water Cut
Off (LWCO). Check your local codes to see if a Low Water Cut Off is required
(LWCO) and if this device conforms to local code. See the Rinnai Boiler
Applications Manual for further information.
The Low water cut off is not serviceable.
fi gure 9