The "Stay" Command - Petsafe Collarless Remote Trainer Guide D'emploi

The "Stay" Command

1. Put a 10-foot leash on your pet.
2. Put your pet on his bed. Hold your leash in one hand and the Remote
Trainer in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say anything
to your pet.
4. If your pet tries to leave the bed, press and hold the "N" Button and give
the "Stay" command. Continue to hold the button until your pet is back
on his bed. If necessary, use the leash to guide your pet onto his place.
5. When your pet is back on his bed, press and hold the "P" Button for 2
seconds.
6. Once your pet has settled for a few seconds, release him and play calmly.
7. Repeat steps 1 through 5.
10
1-800-732-2677