Spanset Magnum-X Instructions De Service page 13

... or connectors, hooks, couplings among
other things are deformed or damaged.
The lifting sling must be withdrawn from
use in the event of cuts, transverse tears,
notches, breakages or corroded fittings.
Worn Magnum-X round slings must be
withdrawn from service!
Repairs
Repairs must re-establish the original con-
dition and properties of the given lifting
sling. Warning: Repairs may only be carried out by the ma-
nufacturer or persons authorised by the manufacturer!
Documentation
The results of inspections must be recorded. It is advisable
to maintain inspection records or logbooks for this purpose
(or an EDP table).
EPIS
The Magnum-X round sling comes with an RFID-chip –
transponder - as standard. It is built into the label to avoid
damage or loss. The RFID chip is adapted to the EPC pro-
gram with which products and test data concerning the
products can be stored in the EPC database. EPC allows
you to plan and monitor exactly when testing is necessary.
To use RFID technology and EPC, please read the Instructi-
ons for Use on EPC.
5. Storage
By appropriate care for and correct storage of your Ma-
gnum-X round slings, you will maintain the high quality
and functionality of this SpanSet product for a long time.
This is why it is important to examine the Magnum-X
round sling after each use for possible damage or dirt and
to remove these before storing. Store your Magnum-X
round sling in a clean, dry, well-ventilated place, avoiding
direct insolation, as well as contamination by chemicals.
After a longer period in storage, check the Magnum-X
round sling is suitable to function fully.
6. Training
The awareness of sound and safe lifting slings is growing
continuously, and the statutory requirements as well as
the know ledge associated with safe lifting and movement
of loads are changing continuously. It is therefore impera-
tive that your personnel are competently trained and un-
dergo regular re-training. SpanSet hold regular training
and advanced training courses in the field of Safe Lifting,
Load Security and Height Safety Technology.
We can also hold such courses on your premises. Be sure
to inquire!
7. EU-Declaration of conformity
As per the EC Directive on Machines 2006/42/EC, Appen-
dix II A. We hereby declare that the SpanSet slinging gear
supplied with this declaration with regard to EN 1492-2,
on the basis of its design and construction type, as well as
model put on the market by us, fulfills the relevant, basic
safety and health requirements of the EU guideline con-
cerned. This declaration automatically expires, if the
equipment is modified without contacting us. Relevant EU-
Directives: Machine-Directive 2006/42/EG. Applied natio-
nal standard and technical specifications in particular EN
1492-2, 2000. Load suspension devices used in lifting ap-
pliances (BGR 500, chapter 2.8). Starting with the date of
manufacture 01.12.2009
P. Reuls, 01.12.2009
Please also note the range of SpanSet accesso-
ries for lifting slings:
- Load capacity table
- Load capacity controller
- secutex protective sleeves
- SpanSet abrasion protection
- Crane weigher
Source for supply for EN and VDI standards and
specifications:
British Standards Institution
389 Chiswick High Road
GB-London W4 4AL
Tel +44 208 996 90 00
Fax +44 208 996 74 00
GB
13