Eschenbach smartlux DIGITAL Mode D'emploi page 22

Writing position:
You can also use the smartlux DIGITAL for writing underneath it. To do this,
fold the stand out as far as the first snap-in position and position the device
vertically.
Use of the lanyard
If you want to hang the device round your neck, take the lanyard supplied
and thread it from the outside housing hole to the hole towards the middle
of the housing through the eyelet (o). Otherwise, the lanyard can slide
into the inside of the device.
Charging the internal battery:
Before using the smartlux DIGITAL for the first time, you need to fully charge the internal battery!
To charge it, connect the cable from the mains adapter supplied to the charging socket (a) on the smartlux DIGITAL. Now
plug the mains adapter into a suitable mains socket using the relevant mains plug type. Charging takes about 2 hours.
The charging indicator LED (s) will illuminate red during the charging process. The charging check LED goes out once the
charging process is complete. When charging is complete, disconnect the mains adapter from the plug and from the smartlux
DIGITAL. You can use the device during the charging process. This will extend the charging time.
- 22 -