Deleting A City From The Display List - Conrad DV216NL Notice D'emploi

f) Deleting a city from the display list
As described in chapter 12. e), you can save up to 5 cities in different countries and display
their weather forecast with the buttons "" and "".
To delete a city from the display list, proceed as follows:
• Select the city you want to delete from the display list with the buttons "" or "".
• Keep the button "SET" depressed (approx. 3 seconds) until "COUNTRY" appears on the
bottom of the display.
• Briefly press the button "". Now the country in which the city to be deleted is located is
displayed.
• Then briefly press the "SET" button.
• Now the display shows "CITY".
• Briefly press the button "". The city is displayed now (observe the small tick mark "√" above
the city).
• Briefly press the button "TEST". The tick mark "√" disappears.
• Leave delete mode by pressing "SET".
g) Entering your place of residence
With this function, you can enter the name of your place of residence.
For this purpose, proceed as follows:
• Keep the button "SET" depressed (approx. 3 seconds) until "COUNTRY" appears on the
bottom of the display.
• With the buttons "" and "" select the country (e.g. "D/GER" for Germany) and confirm
your selection by briefly pressing the button "SET".
Now the display shows "CITY".
• With the buttons "" and "", you can select a city near to your place of residence.
• Briefly press the "MEM" button. Now the previously displayed city name disappears and a
blinking line "_" appears in its place for the input field.
Use the following buttons for your entry (press briefly):
- Buttons "" and "": select character/numeral
- "SET" button Save character/numeral and jump to the next position
- "TEST" button Jump back one spot (correction)
71