Conrad DV216NL Notice D'emploi page 67


You can select altogether 5 cities; of course, you can also make this setting
later on. It is also possible to delete a city already selected for display and save
another one (see chapter 12.e) and 12.f).
If you do not set the country and the city as described above, the weather
station automatically sets "Germany" for the country and "Frankfurt/Main" for
the city.
• With the buttons "" and "", you can select additional cities and save them by pressing
the button "TEST".
• Press the button "SET". The settings are saved now.
• Now the display shows various already available weather data for today and tomorrow.
• Then the weather station searches for the outdoor sensor and the symbol "OUT" blinks in
the display section for the temperature/air humidity. This takes approx. 2-3 minutes. Wait for
that period, do not press any buttons.

If there is still no display of the outdoor temperature/humidity after 2 to 3
minutes, place the outdoor sensor in a different location (not directly next to the
weather station, keep a distance of at least 1 m).
Then press the button "IN/OUT" for approx. 3 seconds to start the search for
the outdoor sensor again.
The symbol "OUT" blinks again, the outdoor sensor is searched.
67