Wolf ICBCT15I/S Guide D'utilisation Et D'entretien page 17

W O L F
T I M E R
The induction cooktop features a countdown
timer located in the control panel. The timer
may be set to any one-minute increment from
1 to 99. Once set, the remaining time will be
illuminated in the control panel as it counts
down. The timer is available for use in any
mode except Lock mode.
18
I N D U C T I O N C O O K TO P
O P E R AT I O N
To activate the timer, touch "+" on the
timer control.
Touch and hold "+" or "–" until the desired
time is reached. The timer will start 3
seconds after the last change in value.
When the timer reaches 0, the unit will
sound. The reminder will continue to sound
until is pressed.
U S E & C A R E
S O U N D C O N T R O L
The induction cooktop is equipped with the
ability to change the volume and frequency, or
tone, of the touch controls through the user
option, activated through the timer controls.
To activate the user option, the cooktop
must be in Idle mode.
Touch and hold
activate the volume adjustment. The three-
digit display will show "Uol."
Touch and hold
activate the frequency adjustment. The
three-digit display will show "FRE."
Both the volume and frequency are adjusted
using the timer "+" and "–" touch pads. One
touch equals one step up or down in volume
or frequency. The power bar indicator graph of
the rear 1800/3000 W element will show the
current status of the volume or frequency and
change with the user's input. (1 bar = low, 8
bars = medium and 16 bars = high.)
As the volume/frequency is adjusted, the
cooktop will beep with each change. The beep
will represent the volume/frequency level that
is currently displayed by the power bar graph.
To exit the user option and return the
cooktop to Idle mode, touch
Or, if no touch pad is touched for 10
seconds, the level is then stored and the
cooktop returns to Idle mode.
Countdown timer
for 3 seconds to
for 5 seconds to
.
Timer controls