Publicité
Les langues disponibles
Les langues disponibles
- Clean the tray (n°5 on picture) with a wet sponge and some dishwashing liquid
(can also be washed in a machine) and wipe.
- After the tray (n°5 on picture) dries, put it back in the appliance.
- Clean the outer case of the appliance without using any abrasive product.
- Never clean the appliance under a water jet, the infiltrations may cause irrepara-
ble damage to the appliance.
- Never immerse the appliance, cord or plug in water or any other liquid to avoid
any electric shock.
Attention to the capacity of the drip tray (No.5 in the photo): consider emptying
it regularly, any overflowing inside the appliance may cause irreparable dam-
age.
During a prolonged non-use, we recommend you strongly to keep the device shielded
from the humidity .
7. TECHNICAL SPECIFICATIONS
Models
Outside dimensions
Cooking surface
Weight
Power
No element
Current
Voltage
Wires colours correspondence
The equipotential connection marked by this symbol
equipotential conductive connection of your installation by means of a minimum con-
duction of a 2.5 mm² section.
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-38
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
Humidity protection degrees IPX4, in conformity with the norm 60335-2-38
(2008)
PSR 400 E
400x475x230 mm
600x475x230 mm
400x400 mm
22 Kg
3000 W
1
13 A
13 A / Phase???
220-240 V ~
380-415 V 3 N ~
Phase 1
Phase 2
Phase 3
Neutral
Earth
PSR 600 E
900x475x230 mm
600x400 mm
900x400 mm
32 Kg
2 x 3000 W
3 x 3000 W
2
13 A / Phase????
380-415 V 3 N ~
Brown
Black
Grey
Blue
Yellow-Green
must be linked with the
PSR 900E
44 Kg
3
16
Publicité
