Emergency Key Override - Kaba COMBI B30 Manuel D'utilisation

4.2 Opening with double code
Step
Enter the first valid opening code, e.g. 00678912 and press enter
1.
Now the signal for the input of the second is displayed
2.
Enter another valid opening code, e.g. 10222222 and press enter
3.
Turn the actuating knob within 4 seconds through 90° clockwise to the stop
4.
5. Silent alarm
If there is a threatening situation, the lock can be opened with simultaneous generation of a silent alarm, provided
the silent alarm has been activated and the lock is connected to an intruder detection system (not included in
the scope of delivery).The alarm code consists of a valid code, the last position/digit of this code is increased or
decreased by one digit.
5.1 (de)Activating silent alarm
Step
Press P
1.
Enter your 8-digit master code, e.g. 00678912 and press enter
2.
Enter P8 and press enter
3.
5.2 Opening with silent alarm
Step
Enter your 8-digit alarm code, e.g. 00678912 +1 and press enter
1.
Turn the actuating knob within 4 seconds through 90° clockwise to the stop
2.
• If the result becomes double-digit only the last number is taken (e.g. 9+1=10, enter only 0).

6. Emergency key override

6.1 Opening with the key
Step
Note the position of the rotary handle (marking)
1.
Insert the Allen wrench up to a stop into a small hole on the bottom side
2.
Remove the rotary handle to the front, while keeping the Allen wrench pressed
3.
Removing the Allen wrench and square shaft
4.
Inserting the key
5.
Turning the key clockwise to the stop
6.
The lock is open
7.
U kunt de kluis openen
7.
24
Action
Action
Action
Action
Key

00678912

10222222
Key
P

00678912

P8
Key
3 
0067891
Figure
6.1
6.1
6.2
6.3
6.4
6.5