Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.2 Opening with activated time delay and opening window
Step
Enter your 8-digit code e.g. master code 00678912 and press enter
1.
Wait until the end of the time delay
2.
The opening standby time starts after the opening delay
3.
(the light flashes, you will hear a short signal)
Enter your 8-digit code again e.g. master code 00678912 and press enter
4.
Open de handgreep binnen vier seconden, de kluis is geopend
5.
3.3 Deleting the time delay
Step
Press P
1.
Enter your 8-digit code e.g. master code 00678912 and press enter
2.
Enter P2 and press enter
3.
Enter 0000 and press enter
4.
The opening delay and opening standby time are now deactivated
5.
3.4 Opening without time delay
The instant opening code is meant to bypass the time delay. The instant opening code is assigned to user 95.
A corresponding user code has to be activated. The code that is entered first, must not be identical to
the code of user 95.
Step
Enter the 8-digit courier code of user 95 e.g. 95101010 and press enter
1.
Turn the actuating knob within 4 seconds through 90° clockwise to the stop
2.
4. Double code
4.1 (de)Activating double code
The double code function allows to set the lock in such a way that two optional but different codes (different
IDs) are required to open the lock. The double code includes all operators (master, user and courier).
Step
Press P
1.
Enter your valid master code e.g. 00678912 and press enter
2.
Enter P7 and press enter
3.
The double code is now (de)activated
4.
• To activate the double code, at least two operators with valid codes must be created.
• If the red LED is displayed additionally to the normal acknowledgment signal, the double code has been
activated previously and is deactivated now. To activate it again, repeat the entire procedure.
think safe
Action
Action
Action
Action
Key
00678912
00678912
Key
P
00678912
P2
0000
Key
95101010
Key
P
00678912
P7
23
Publicité
Table des Matières
