Medtronic GUARDIAN Manuel D'utilisation page 28

To enter a BG meter reading into the Events screen:
1. Measure the BG with a BG meter.
2. Tap at the bottom of the Home screen.
3. Tap on the Events screen.
4. To change the date or time for the entry, tap Time and make the appropriate changes.
5. Use the number pad to enter the BG meter reading.
6. Make sure the value displayed above the number pad is correct. If the value is incorrect, tap
clear it and enter the correct value.
7. To avoid calibrating the sensor with this reading, tap Save at the bottom of the screen.
8. To calibrate the sensor with the entered BG meter reading when calibration is available, tap
Calibrate at the bottom of the screen.
The app returns to the Home screen after selecting Save or Calibrate, and
graph at the selected time.
The following icons may appear during calibration. Select the icon to see more information
about the calibration status.
indicates that the calibration status is unknown
indicates that calibration is currently not permitted
Entering insulin injection information
If delivering insulin using an insulin pump, insulin pen, or a syringe, use the app to record the amount
of insulin injected.
To enter the type and amount of insulin injected:
1. Make a note of the amount and type of injection taken.
2. At the bottom of the Home screen, tap .
3. On the Events screen, tap .
4. To change the date or time for the entry, tap Time and make the appropriate changes.
5. Use the number pad to enter the insulin amount.
6. Make sure the value displayed above the number pad is correct. If not, tap
the correct value.
7. Tap Type and select the type of insulin taken:
• Rapid-acting
• Long-acting
• Unspecified
8. Tap to return to the Insulin Event screen.
28
to
appears on the
to clear it and enter