Publicité
Les langues disponibles
Les langues disponibles
Table glass 19) is broken or scratched.
The micrometer screw crank no longer
drives the stop.
Software problem.
For any other case, please contact us
by referring to the serial number listed in
16).
opensys25-50$24.docx
in the plugs.
2. If this is not enough; contact your IT depart-
ment or, if necessary, our technical depart-
ment.
Order a spare glass.
Table 142-2 : VER-007709
Table 143-5 : VER-006113
Table 143-6 : VER-006112
Rotary table without scale : VER-007698
Rotary table with scale : VER-006114
The micrometer screw flange screw is too tight.
Loosen it completely and then tighten to a maximum
of 1.5N.
1. Press the F1 key on your keyboard and refer
to the online help.
2. Disable the screensaver and automatic log-
out.
3. Turn off your PC completely, wait for ten sec-
onds and turn it back on.
4. If this is not enough; contact your IT depart-
ment or, if necessary, our technical depart-
ment.
Tel: +41 (0)32 365 51 31
Fax: +41 (0)32 365 76 20
Email:
info@marcel-aubert-sa.ch
16
Publicité
