marcel aubert OpenSYS 25 Mode D'emploi page 12

Before powering up
Danger of electrical shock!
Caution
Start-up
Base 183
Measuring table
OpenSYS - 331
Descriptions
opensys25-50$24.docx
 Do not open the enclosure.
 Never use 3-wire to 2-wire adapters.
 The insulating jacket of the cable shouldn't have any defects
General safety precautions must be followed when operating this
electrical equipment. Not following these precautions could damage
the equipment or injure personnel.
Safety rules vary between companies. If a conflict exists between the
content of this guide and the rules of the company using this system,
the more stringent rules should be applied.
A) Check the levelling of the machine by adjusting the levelling
feet.
B) Attach the micrometric screws X and Y in their housings with a
maximum of 1.5N tightness.
OpenSYS - 183
12