Appliance Description; Shiatsu Massage Cushion; Start-Up; Use - Beurer MG 149 Mode D'emploi

• Diabetes,
• in case of pains of unclarified origin.
The device is only intended for the purpose described in these operating instructions. The manufacturer cannot
be held liable for damage occurring as a result of inappropriate or careless use.

7. Appliance description

Shiatsu massage pillow (front)
2
3
Shiatsu massage cushion (rear)

8. Start-up

• Remove the packaging
• Check the device, mains part and cable for damage.
• Connect the power supply plug to the massage device.
• Route the cable safely so that there is no risk of anyone tripping over it.

9. Use

To start with, gently press the part of your body you wish to massage against the massage device. Then make
sure that you are in a comfortable position before gradually shifting your weight onto the massage device.The
massage must be pleasant and relaxing at all times. Stop the massage or change your position or the contact
pressure if you find it is painful or unpleasant.
• Do not trap or squeeze any part of your body, especially feet, hands and fingers, between the rotating mas-
sage heads and their mountings in the device.
• Switch on the massager using the -button. The massage heads start to rotate and automatically change
the massage direction. Press the -button again to activate the light and heat function.
• Press and hold the
Note
• Do not use the massage device for longer than 20 minutes. Otherwise, using the device for longer
can over-stimulate the muscles and cause tension instead of relaxation.
• The device features an automatic switch-off function, which is set to the maximum operating duration
of 20 minutes.
1
4
button to turn off the massager.
1. 4 massage heads (4 heated and illuminated mas-
sage heads), rotating in pairs
2. -Button
3. Mains part
4. Clip buckles for attachment
14