Cleaning And Maintenance; In The Event Of Problems; Disposal; Technical Data - Beurer MG 149 Mode D'emploi

Back massage: upper back
area

10. Cleaning and maintenance

CLEANING
WARNING
• Before cleaning disconnect the power supply unit from the mains socket and disconnect it from the
device.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device
or accessories.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.

11. In the event of problems

Problem
Massage heads rotating
at reduced speed.
Massage heads not
moving.

12. Disposal

CAUTION
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

13. Technical data

Technical data:
Input
Output
Average active efficiency:
Efficiency at low load (10 %):
No-load power consumption:
Back massage: lower back area
(lumbar vertebrae)
Cause
The load on the massage
heads is too great.
Appliance not connected to
the power supply.
100-240 V~; 50/60 Hz; 0.5 A
12.0 V
≥ 86.30%
≥ 84.95 %
≤ 0.05 W
Leg massage
Remedy
Release the massage heads.
Connect the mains part and switch on the
device.
1.5 A; 18.0 W
15