Topcom Butler Outdoor 2010 TWIN Manuel D'utilisateur page 24

Additional handsets and base stations
4 15
2. Press or repeatedly, select 'LINE SETTINGS'.
3. Press 17 to confirm.
4. Press 4 or 15 repeatedly, select 'DIAL MODE'
5. Press to confirm.
17
6. Select 'TONE' or 'PULSE' and press
9 Additional handsets and base stations
Up to 5 handsets can be registered to one base station. Additional
handset must be registered to the base unit before use. Handsets
of a bundled model are already registered to the base.
You can also register handsets of the Ultra range (like
the Ultra S1200C)!
9.1 Registering an additional handset
This is only necessary if you have de-registered a
handset or bought a new separate handset. You don't
have to register handsets of a bundle!
Hold down the paging key
5 seconds .
Registration mode on the base station is now activated for approx.
1 minutes. You must perform the following steps to register a
handset:
1. Press .
17
4 15
2. Press or repeatedly, select 'REGISTRATION'.
3. Press 17 to confirm.
4. Press 4 or 15 repeatedly, select 'REGISTER'.
5. Press to confirm.
17
6. Enter the base station PIN code (system PIN, default 0000)
and press .
17
24
to confirm.
17
19 on the base station for more than
• The handset will now search for the base station and register
when it has found it. Following successful registration, the
display shows standby mode and the handset name and
number.
9.2 De-registering a handset
It is possible to de-register a handset from a base station. You
should do this, for example, if a handset is damaged and needs to
be replaced.
1. Press .
17
2. Press 4 or 15 repeatedly, select 'REGISTRATION'.
3. Press to confirm.
17
4 15
4. Press or repeatedly, select 'UNREGISTER'.
5. Press to confirm.
17
6. Enter the system PIN (base station PIN code) and press
.
17
4 15
7. Press or repeatedly to select the handset to be
de-registered and press
9.3 Using multiple handsets
These functions are only possible if more than one
handset is registered to the base station.
9.3.1 Call another handset
1. Press INT .
12
4 15
2. Press or repeatedly and select the handset you
want to call.
• Select 'ALL HANDSETS' to call all handsets.
• Press to call the selected handset(s).
17
3. Press 6 to hang up at the end of your call.
Butler Outdoor 2010 - Twin - Triple
to de-register.
17