Butler Outdoor 2010 - Twin - Triple
of the line being able to hear you. The mute key
pressed again to reactivate the microphone.
4.13 Pause key (dialling pause)
If you want to insert a dialling pause while dialling a telephone
number, press the pause key P
appropriate point in the number until a P appears in the display.
If you then dial this number (or select it for redial), the dialling
pause (approx. 3 seconds) is automatically dialled too.
4.14 Finding the handset from the base station
(paging)
If you cannot find the handset, briefly press the paging key
on the base station. All handsets registered on the base station
ring which allows them to be located. Press any key on the handset
to stop it ringing.
4.15 Using the alphanumeric keypad
Use the alphanumeric keypad to enter a text. Press the
appropriate alphanumeric key to select a letter. For example, if you
press the '5' numeric key, the letter 'J' appears in the display first.
Press the key repeatedly to enter other characters assigned to this
key.
Press the '2' key once to select the letter 'A'. If you want to enter
'A' and 'B' in succession, first press the '2' key once to select the
letter 'A'. Then wait for a second to move to the second character,
then press key '2' twice to enter 'B'. You can use the escape key
ESC
to delete letters that have been entered incorrectly. The
3
character before the cursor is deleted. All characters in an entered
sequence can be deleted at once by pressing and holding the
escape key ESC
3
for 2 seconds.
must be
2
8
for 3 seconds at the
Use the left
16
or right
#
8
key to toggle between upper and lower case letters.
4.16 Setting the ringer volume on the handset
You can set the ringer volume for incoming calls (internal or
external) to 6 levels (levels 1 to 5 and 'OFF').
If you select 'OFF', the
handset does not ring when there is an incoming call. level "5" is
the highest. (The default setting on the telephone is level "3".)
4.16.1 Setting the ringer volume for internal and external
calls (0-5)
1. Press
.
17
19
4
2. Press
or
3. Press
17
4
4. Press
or
5. Press
17
4
6. Press
or
7. Press
17
•
The current volume is displayed and can be heard.
4
8. Press
or
you want.
9. Press
to confirm your selection or press ESC
17
exit the menu without saving.
To turn off the handset ringer permanently, press and
hold
8
for approx. 3 seconds. The
appear in the display. To reactivate the ringer, press and
hold
8
again for 3 seconds.
Handset - settings and operation
5
key to move the cursor. Use the
symbol appears in the display. The
15
repeatedly, select 'HS SETTINGS'.
to confirm.
15
repeatedly, select 'HANDSET TONES'.
to confirm.
15
repeatedly, select 'RING VOLUME'.
to confirm.
15
repeatedly to select the ringer volume
3
to
symbol
17